Parts from the sandblaster …
… the sandblasting company was so kind to sandblast the parts I took out of body – at no extra cost ! So I put some rust prevention primer on weiterlesen…
Alles über meinen 71 Plymouth GTX
… the sandblasting company was so kind to sandblast the parts I took out of body – at no extra cost ! So I put some rust prevention primer on weiterlesen…
Hi,Today I decided to build something instead of tearing something apart … So I welded in the RH subframe connector ! But first I had to remove the original torque weiterlesen…
Hi,Today I removed the LH trunk extension.So I can fix the rotten lower rear quarter panel …
Some progress … LH inner and outer wheel well is out. The front lower quarter panel is looking really bad, as the rear lower quarter panel ? ? ? !
On Saturday I have done a lot of little things, so I have not much pictures … Thanks to my fellow garage neighbor, I was able to sandblast the small weiterlesen…
Today I ended up removing everything inside of the RH quarter panel. So I removed the RH trunk extension including all the reinforcement. I also removed the RH trunk gutter. weiterlesen…
That one who engineered this fu***** lower quarter panel to rocker panel area ! This is insanely stupid ! Between the (inner) rocker panel and the lower quarter panel is weiterlesen…
Hi, Yesterday I picked up the last parts from the sandblasting company, today I covered them in epoxy – so they cannot rust again …
… I have picked up the last parts from the sandblasting company. Both fenders, both doors and the outer deck lid skin. Good that my car have so much space weiterlesen…
After the removal of the inner wheel well, I removed the outer wheel well … Unfortunately I was not so happy what I found there.
Today I built a extension for the car lift, so I have the body in balance … After that I started drilling out the spot welds from the outer wheel weiterlesen…
Today I removed the inner wheel well on the passenger side. Not because it is rusted, no I will mini tub it later. But it should look factory later 😉 weiterlesen…